Product ID:BE SQUARE 195 WHITE AND AMBER
MSDS Date:11/01/1985
FSC:9160
NIIN:00-250-6305
MSDS Number: CFCSG

Emergency Phone: 918-836-1501

Info Phone: 918-836-1501

Cage: GO158

Telephone: (314) 961-3500

Cage: 85331

NONHAZARDOUS INGREDIENTS

Fraction By Weight: 100%

LD50 LC50 Mixture:TLV/TWA 2 MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HIGH CONCENTRATIONS OF WAX FUMES MAY
CAUSE EYE, NOSE AND RESPIRATORY IRRITATIONS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:A BURN FROM MOLTEN WAX SHOULD BE TREATED AS A THERMAL BURN.
HOT LIQUID WAX TENDS TO CLING TO FLESH ESPECIALLY AFTER
SOLIDIFYING, IT SHOULD BE COOLED AS QUICKLY AS POSSIBLE USING, FOR
EXAMPLE, TAP WATE R.

Flash Point Method:COC
Flash Point:>500F,>260C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL AND WATER FOG.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING GEAR WHEN FIRE
FIGHTING IN CONFINED SPACES.
Unusual Fire/Explosion Hazard:WHEN FINELY DIVIDED & SUSPENDED IN AIR,
THESE PRODUCTS COULD BE FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS &
OPEN FLAMES. USE ADEQUATE VENTILATION & GROUND EQUIPMEN

Spill Release Procedures:IF HOT LIQUID, ATTEMPTS TO CONFINE SPILLL AND
LET WAX SOLIDIFY. ONCE SOLID, WAX MAY BE RECOVERED AS ANY OTHER
MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM OPEN FLAMES, BOILERS
AND STRONG OXIDANTS SUCH AS LIQUID CHLORINE, SODIUM HYPOCHLORITE,
ETC.
Other Precautions:IF THIS MATERIAL IS PURCHASED AS A POWDER IT SHOULD
BE SUBDIVIDED TO OR COLLECTED AS A POWDER REFER TO ANSI/NFPA
PHAMPPLET NO. 654.

Respiratory Protection:NORMALLY NOT NEEDED, BUT WHEN HANDLING FINELY
DIVIDED WAX, A DUST RESPIRATOR IS SUGGESTED. AVOID BREATHING HOT
WAX VAPORS.
Ventilation:LOCAL EXHAUST: ADEQUATE TO CAPTURE WAX DUSY ANDOR WAX
FUMES.
Protective Gloves:NOT REQUIRED EXCEPT FOR HOT LIQUID WAX.
Eye Protection:SAFETY GLASSES AND PROTECTION FROM DUST.
Other Protective Equipment:WHEN HANDLING HOT LIQUID WAX, FACE AND HAND
PROTECTION SHOULD BE PROVIDED.
Work Hygienic Practices:WASH AFTER USAGE.
Supplemental Safety and Health
NONE.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:200-150F
Spec Gravity:0.93
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:WHITE OR AMBER SOLID HAVING LITTLE OR NO ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:CONFORM WITH APPLICABLE DISPOSAL REGULATIONS.
SUGGEST BURNING IN AN APPROVED INCINERATOR OR BURY IN AN APPROVED
LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.